Steel butt hinges hold the doors of our homes, offices and factories. If you make or import them, you must now follow a government rule. This simple guide explains BIS certification for steel butt hinges in easy words, so you know what to do and what to avoid.
What Is IS 1341:2018?
IS 1341:2018 is the Indian Standard made by the Bureau of Indian Standards (BIS) for steel butt hinges. Think of it as a rulebook. It tells a maker what steel to use, what size the hinge should be, how it should be made, and how smooth the finish should look. A hinge that follows this rulebook is safer and lasts longer.
Why Did the Government Make It Compulsory?
Many weak and low-quality hinges were being sold in the market. They broke, rusted or came loose. To stop this, the government issued the Hinges (Quality Control) Order, 2023, notified as S.O. 5294(E) on 8 December 2023. After this order, steel butt hinges must carry BIS approval before they are made, imported or sold.
Who Needs the Certificate?
| Who you are | What you need |
|---|---|
| Indian factory making steel butt hinges | ISI mark license under Scheme-I |
| Foreign factory selling to India | License under FMCS, plus an Authorised Indian Representative |
| Importer or trader | Hinges that already carry a valid BIS license |
The ISI Mark on Your Hinge
Once your license is granted, you can put the BIS ISI mark for steel butt hinges on your product. The mark shows the ISI symbol, the number IS 1341:2018 and your CM/L license number. Buyers, builders and customs officers look for this mark first. Without it, your goods can be stopped.
Step-by-Step Process
| Step | What happens |
|---|---|
| 1 | Check the standard and decide which hinge types you will make |
| 2 | Get samples tested in a BIS-recognised lab |
| 3 | Apply online on the Manak portal with factory and quality documents |
| 4 | BIS officer visits your factory |
| 5 | Samples are verified |
| 6 | License is granted and you start marking |
What Tests Are Done?
Every hinge must pass the checks written in the standard. The BIS testing requirement for steel butt hinges looks at things like:
- Type of steel used
- Size, hole position and thickness
- Smooth finish with no cracks, pits or sharp edges
- Proper making of the pin and flaps
After you get the license, you must keep testing your own production regularly. BIS can also pick samples from the factory and the market at any time.
Time and Cost
| Point | Details |
|---|---|
| Time (with a recent lab report) | About 30 days target |
| Time (normal route) | About 90 days target |
| Foreign factories | Around 6 months |
| Application fee | ₹1,000 |
| Yearly license fee | ₹1,000 |
| Inspection charge | ₹7,000 per man-day |
| Other costs | Lab testing and yearly marking fee |
These figures can change, so always confirm the latest on the BIS website.
What Happens If You Skip It?
- Goods can be stopped at customs
- Selling or storing uncertified hinges is not allowed
- Penalty under the BIS Act can be jail up to two years or a fine of at least ₹2 lakh, or both
- Big buyers and builders will not accept your hinges
Common Mistakes to Avoid
- Applying before checking the full standard
- Sending incomplete documents
- Using steel that does not match the standard
- Forgetting the regular in-house testing after the license
Why Take Expert Help?
A good BIS consultant for steel butt hinges saves you time, money and worry. The consultant prepares your files, guides your factory checks, and talks to BIS on your behalf. This is where EVTL India can help.
Conclusion
EVTL India is one of the leading BIS Consultant in India, helping manufacturers obtain their BIS licenses hassle-free. Whether you run a small workshop or a large plant, the team guides you from the first document to the final license.
In short, follow IS 1341:2018, keep your quality steady, and get your license before you sell. Call EVTL India today for a simple, clear plan.
FAQs
1. Is BIS certification compulsory for steel butt hinges?
Yes. Under the Hinges (Quality Control) Order, 2023, you cannot make, import or sell them without a valid BIS license.
2. Which standard applies to steel butt hinges?
IS 1341:2018.
3. How long does it take to get the license?
BIS targets about 30 days if you apply with a recent lab test report, and about 90 days on the normal route. Your own readiness decides the real time.
4. Can a foreign maker apply?
Yes, through the Foreign Manufacturers Certification Scheme (FMCS) with an Authorised Indian Representative.
5. Can I transfer my license to another company or factory?
No. A license is given for one factory and one product. If the owner or address changes, you must inform BIS.
6. Do small units get any relief?
Micro and small units may get fee concessions. Check with BIS or ask EVTL India.
Comments